Table of Contents
Advertisement
Gripping Crossover
Hold Crossover in the right position for a call as indicated
below:
Correct
Make sure not to block the internal antenna embedded
in Crossover. Check the location of the intenna on the
illustration on page 14.
Metal accessories can affect the quality of calls.
Activating Crossover
Go through the following steps when you turn on Crossover for
the first time.
Learning how to use Crossover
1. Press and hold the LOCK/PWR key to turn on Crossover.
2. Tap the android.
3. Select and tap a language for Crossover and tap Next.
4. Tap either Mobile network or Wi-Fi or Wi-Fi only, for
Internet connection and tap Next.
Incorrect
17
5. Tap Connect to Wi-Fi network > Next if you want to
establish a connection to the Wi-Fi network. Or tap Next if
you want to connect to the network later.
6. Select and tap an available Wi-Fi network if you have tapped
Connect to Wi-Fi network > Next in step 5. Follow the
necessary steps to connect to the Wi-Fi network. For more
information, refer to page 86.
7. Check the mobile network or Wi-Fi network and tap Next.
8. Tap See location in applications (such as Maps) using
wireless networks to Use Google location, tap Agree for
Location consent, and tap Next.
9. Tap Google account if you want to set up a Google account
and follow the necessary steps, or just tap Next. For more
information on creating a Google account, refer to the next
section.
10. Check how to unlock screen and tap Next in the middle of
the screen.
11. Check how to use the function key and tap Next.
12. Tap Tap here to start typing in the middle of the screen if
you want to learn how to use the onscreen keyboard and
follow the instructions. Or you can tap Skip and learn it later.
13. Tap Sync now for AT&T Address Book sync. You should
insert a SIM/USIM card in Crossover. Tap Skip if you want to
sync later and tap OK.
Note You can do all of these steps later by tapping Tutorial.
Getting Started
Advertisement
Table of Contents
