Managing Running Applications - Pantech Crossover User Manual

Getting Started
Icon Description
Bluetooth is connected.
Bluetooth is active but not connected to other
device.
A file is ready to be delivered from other device.
Portable Wi-Fi hotspot is active.
USB tethering is active.
USB tethering or Portable Wi-Fi hotspot is not
active.
The speakerphone is active.
Strength of signal: The bar becomes bigger
when the signal is strong.
Airplane mode is active.
There is no signal.
A call is under way.
There is a call on hold.
There is a missed call.
Strength of battery: The more green, the more it
is charged.
The battery is charging.
There is an upcoming event.
Icon Description
Music is being played.
There is no SIM/USIM card.
The phone vibrates when there is an incoming
call.
The other party cannot listen to you during a call.
The phone doesn't ring when there is an
incoming call.
The memory disk is full.
There is an error.

Managing running applications

1. Press and hold o while you are
using an application. Applications
that are running in the background
appear.
2. Select and tap an application in the
screen if you want to resume your
work with the application.
3. Tap if you want to end the
application by force and tap Yes.
Press n and tap Close all > Yes if
you want to stop all applications at
once that are running.
Note Make sure to press
to finish using an application. Otherwise, the application continues to
run and will take memory and consume battery.
20
and move to the home screen if you want
l