Pedal Assign - Yamaha PortaTone PSR-1700 Owner's Manual

Pedal Assign

Optional Yamaha FC4 or FC5 footswitches and/or or
FC7 foot controllers can be plugged into either or both
of the rear-panel PEDAL jacks and used to control a
wide range of functions.
PEDAL
2
(FC7)
Example:
Assigning AUTO ACCOMP
on/off switching to the pedal.
1 2
PEDAL ASSIGN
72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
1 2
PEDAL ASSIGN
The functions listed below can be assigned to the footswitch or foot con-
1
troller connected to the PEDAL 1 and PEDAL 2 jacks by pressing the appro-
priate function button while holding the PEDAL ASSIGN [1] or [2] button.
• AUTO ACCOMP ON/OFF
• FADE IN/OUT
• INTRO
• VARIATION [A]
• VARIATION [B]
• FILL IN 1
• FILL IN 2
(FC5)
VOICE
ACCOMP
STYLE
SELECT
NOTES
AUTO
ACCOMP
Assignable Footswitch Functions (FC4, FC5)
• BREAK
• ENDING
• ACCOMPANIMENT CON-
TROL START/STOP
• SYNC-START ON/OFF
• CHORD 2 FINGERING
• EFFECT ON/OFF
Assignable Foot Controller Function (FC7)
• VOLUME (24 steps) • DSP DEPTH (15 steps) • PAN (14 steps)
• VOLUME (24 steps)
• Using the foot controller while an Assignable Foot Controller Function is
assigned has the same effect as holding the corresponding panel but-
ton.
• The PEDAL 1 jack is initially assigned to sustain control. A footswitch
connected to this jack functions as a damper pedal, controlling sustain.
Press the pedal to sustain notes after the keys are released.
• The PEDAL 2 jack is initially assigned to the voice volume control (MIDI
Expression control). An FC7 foot controller connected to this jack can
be used to control voice volume: press the pedal forward to increase
voice volume; backward to decrease voice volume.
• A footswitch or foot controller can be returned to its default function by
pressing it while holding the corresponding PEDAL ASSIGN button.
• The ON/OFF operation of a footswitch or the control direction of a foot
controller can be reversed by double-clicking the corresponding PEDAL
ASSIGN button (press the button twice rapidly) without pressing the
pedal.
• If the GATE TIME or STEP size parameter is assigned to PEDAL 1, the
parameter will be decremented each time the pedal is pressed. If as-
signed to PEDAL 2, the parameter will be incremented each time the
pedal is pressed.
• For CHORD 2 mode control press the [FINGERING] button while hold-
ing the appropriate PEDAL ASSIGN button. Then the footswitch can be
pressed while the Auto Accompaniment is playing to switch to the
CHORD 2 mode. The CHORD 2 mode remains active only as long as
the footswitch is pressed.
• The pedal assignment can be stored in the Registration Memory.
PEDAL
2 1
• HARMONY ON/OFF
• SONG RESET
• SONG PLAY/STOP
• GATE TIME
• STEP SIZE