Makita UC3030A Instruction Manual
Hide thumbs
Also See for UC3030A:
- Instruction manual (149 pages) ,
- Owner's and safety manual (68 pages) ,
- Spare parts list (12 pages)
Table of Contents
Related Manuals for Makita UC3030A
Summary of Contents for Makita UC3030A
-
Page 1: Instruction Manual
Instruction Manual UC3030A UC3530A UC4030A UC4530A UC3530AP UC4030AP Important: Read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulations! Keep this instruction manual! -
Page 2: Table Of Contents
Thank you for your trust in our product Table of contents Page Symbols ................ We congratulate you on your new MAKITA electric chain saw. Delivery inventory .............. 3 We are convinced that you will be satisfied with this modern EU conformity declaration ..........3 machine. Packing/Disposal ..............3 Intended use ............... 3... -
Page 3: Delivery Inventory
EU Conformity Declaration Packing/Disposal The undersigned, Yasuhiko Kanzaki, declare that the MAKITA The MAKITA electric chain saw will be delivered in a protective machines, cardboard box to prevent transport damages. Type: 6 EU prototype test certificate No. -
Page 4: Safety Precautions General Precautions
SAfETy PrECAUTIonS General precautions To ensure correct operation the user has to read this instruc- tion manual to make himself familiar with the characteristics of the electric chain saw. Users insufficiently informed will risk danger to themselves as well as others due to improper han- dling. It is recommended only to lend the electric chain saw to people who have proven to be experienced with electric chain saws. -
Page 5: Working Behavior/Method Of Working
Pay attention to the diameter of the extension cable. When using a cable roll the cable should be completely wound off. Use only extension cords that meet the specifications in “Technical data”. If using the saw out of doors make sure that the extension cord is approved for such use. - Page 6 Guide the electric chain saw in such a way that no part of your body is within the elongated swiveling range of the saw (11). Use the electric chain saw for sawing wood only. Do not let the chain touch the ground when it is running. If you are cutting wood lying directly on the ground, turn it over before completing the cut so that you do not cut into the ground.
-
Page 7: Kickback
CAUTIon: Do not fell or debranch trees unless you are specially trained for it! There is a high risk of injury! Make sure to 45° follow local regulations. Before cutting down a tree ensure that a) only those persons are within the working range which are actually involved in cutting down the tree 45°... -
Page 8: Transport And Storage
MAKITA service. Use only original MAKITA spare parts and accessories. Applying spare parts which are not original MAKITA parts or accesories and bar/chain combinations or lengths results in a high risk of accidents. For accidents and damage resulting from using sawing devices or accesories which have not been approved we cannot accept any responsibility. -
Page 9: Technical Data
Technical data UC3030A UC3530A / AP UC4030A / AP UC4530A Power consumption Watt 1570 Nominal voltage 110 ~ Mains frequency 50 - 60 Nominal current Fuse, electric circuit Cable length 1000 Chain type Chain pitch inch 3/8" Length of a cut Max. -
Page 10: Putting Into Operation
PUTTInG InTo oPErATIon CAUTIon: When working on the guide bar or saw chain always wear protective gloves and pull out the power supply plug. CAUTIon: Switch on the electric chain saw only after hav- ing assembled it completely and inspected! Mounting the guide bar and saw chain Put the electric chain saw on a stable surface and carry out the following operations for mounting the bar and chain:... -
Page 11: Tightening The Saw Chain
Using your left hand, lightly press the guide bar against the holder on the housing and guide the saw chain (9) around the nose sprocket (10) on the guide bar. While doing this, pull the saw chain slightly in the direction shown by the arrow. Line up the hole in the sprocket guard with the threaded pin (11). -
Page 12: Checking The Chain Tension
SErVICE wear. regular inspection and maintenance is important for your personal safety, and can be properly performed only by a MAKITA service centre. Engaging the chain brake (braking) If the kickback is strong enough the sudden acceleration of the guide bar combined with the inertia of the hand guard (1) will automatically actuate the chain brake. -
Page 13: Saw Chain Oil
Biologically decomposeable oil is stable only for a The saw chain oil sold by MAKITA, called BIOTOP, is made limited period of time. It should be consumed within of special vegetable oils and is biologically decomposeable to years from the date of manufacture (printed on the 100%. -
Page 14: Refilling The Oil Tank
Refilling the oil tank only if the motor is switched off and the power supply plug is pulled out! Thoroughly clean the oil tank around the cap to prevent dirt from entering the tank. Unscrew the tank cap (1) and fill in chain oil until it is on a level with the bottom edge of the filler socket. Tightly screw on the tank cap. -
Page 15: Switching On The Motor
"off" position. If it does not, do not under any circumstances connect the saw to a power source - do not plug it in. Take the saw to a MAKITA service centre before doing any work with it. -
Page 16: Checking The Chain Brake
Important: If the saw chain does not stop instantly when you carry out this test, do not under any circumstances use the saw! Take the chain saw to a MAKITA service center. Testing the run-out brake Do not work with the saw without first testing the run-out... -
Page 17: Maintenance Sharpening The Saw Chain
MAInTEnAnCE Sharpening the saw chain When working on the saw chain you must always pull out the power supply plug and wear protective gloves. The chain needs sharpening when: the sawdust from sawing humid wood looks like wood flour. the saw chain penetrates the wood only under great pres- sure. -
Page 18: Cleaning The Guide Bar/Lubricating The Sprocket Nose
files and how to work with them - Sharpen using a special file holder with a saw chain round file dia. 4.0 mm. Normal round files are not appropriate for this work. See "Accessories" for the order number. - The file should cut only when pushed forwards (arrow). Lift the file when leading it backwards. First sharpen the shortest cutter. The length of this cutter is then the standerd for all other cutters of the chain. - Always guide the file as in fig. shown - The file holder makes file guidance easier. It is marked for the correct 30°... -
Page 19: Replacing The Saw Chain
Worn out sprockets (2) may damage the new chain and must therefore be replaced. Do not attempt to replace the sprocket yourself. Sprocket re- placement requires special training and tools and must be done at a MAKITA service centre. SErVICE Inspecting and replacing the carbon brushes Important: Inspect the carbon brushes at regular intervals! A notch on the brush shows the limit of wear. -
Page 20: Trouble Shooting
The user of the electric chain saw is not allowed to perform maintenance works which are not described in the instruction manual. All other works must be carried out by a MAKITA service centre. Page... -
Page 21: Service, Spare Parts And Guarantee
To find your local distributor, please visit www.makita-outdoor.com Please, take in mind that in the case that foreign spare parts are used instead of the original MAKITA spare parts this will automati- cally invalidate the MAKITA product guarantee. -
Page 22: Extract From The Spare Parts List
Extract from the spare parts list UC3030A, 3530A, 3530AP Use original MAKITA spare parts only. For performance of repairs and for UC4030A, 4030AP, 4530A replacement of other components your MAKITA service centre should be consulted. -
Page 23: Accessories
Extract from the spare parts list UC3030A, 3530A, 3530AP Use original MAKITA spare parts only. For performance of repairs and for UC4030A, 4030AP, 4530A replacement of other components your MAKITA service centre should be consulted. Pos. MAKITA no. Qty. Denominatio 6 114 100 Oil tank cap compl. - Page 24 To find your local distributor, please visit www.makita-outdoor.com Makita Werkzeug GmbH Specifications subject to change without notice Postfach 70 04 0 D-004 Hamburg Form: 995 704 437 (8.07 GB) Germany...