Specifications - Fosgate Audionics FAP T1 User Manual

Specifications

Preamplifier Analog Section
Input Impedance
Output Impedance (Main RCA)
Rated Input
Maximum Input
Rated Output (100kΩ load)
Minimum Load
Maximum Output
Volume Range
Main
Zone
Bass Management
High-Pass Slope
(Small Speaker Setting)
Low-Pass Slope
Tone Control
Bass Center Frequency/Range
Treble Center Frequency/Range
Channel Separation (at 1kHz)
Crosstalk Between Inputs (at 1kHz)
Preamplifier Digital Section
Frequency Response
Direct Inputs
Analog-DSP Inputs
Digital Inputs
THD+N (at Rated Input & Output)
6-Channel Direct Inputs
Analog Direct Inputs
Analog-DSP Inputs
Digital Inputs
IMD (CCIF) @ 15kHz & 16kHz
6-Channel S/E Inputs
All Other Analog Inputs
Digital Inputs
S/N Ratio (ref. 2.0V rms A-weighted)
All Direct Inputs
Analog-DSP Inputs
Digital Inputs
Second Zone (Zone 2) Section
Frequency Response and Bandwidth
THD+N (at Rated Input & Output)
IMD (CCIF) @ 15kHz & 16kHz
S/N Ratio (ref. 2.0V rms A-weighted)
38
26kΩ
<600Ω
2.0V rms
3.0V rms
1.5V rms
5kΩ
6.3V rms
-80dB to +10.0dB (1dB resolution)
-80dB to +10.0dB (1dB resolution)
Crossover Frequency
(Adjustable
40/60/80/100/120/150Hz)
12dB/octave (2nd order)
24dB/octave (4th order), 40-150Hz
as above
30Hz / ±6dB
10kHz / ±6dB
82dB
86dB
10Hz to 20kHz +0 / -0.2dB
10Hz to 20kHz +0 / -0.5dB
10Hz to 20kHz +0 / -0.4dB
0.0035% (80kHz BW)
0.0035% (AES17 filter)
0.005% (AES17 filter)
0.006% (80kHz BW)
0.003%
0.002%
0.005%
101dB
98dB
100dB
10Hz to 20kHz +0 / -0.2dB
0.01% (80kHz BW)
0.01%
97dB
FM Tuner Section
Sensitivity
IHF
50dB S/N
S/N Ratio
Mono
Stereo
Distortion
Mono
Stereo
Stereo Separation
Adjacent Channel Selectivity
Frequency Response
AM Tuner Section
Sensitivity (20dB S/N)
S/N
Distortion
One Signal Selectivity (±10kHz)
Video Section
Bandwidth
Composite & S-Video
Component Green
Component Red
Component Blue
All video inputs and outputs are 75Ω (ohms), 1.5V p-p. Component and
outputs work with any Video Standard requiring ultra-wide bandwidth
including Component-RGB, HDTV, line doublers, quadruplers, and scalers.
Digital Audio
All digital audio inputs and outputs are to S/PDIF electrical (75Ω (ohms),
0.5V p-p), S/PDIF optical (Toslink), or AES / EBU (110Ω (ohms), 5V p-p)
standards as appropriate.
Processor
Audio Converters
Digital Audio Inputs
Analog to Digital
Digital to Analog
General
Supply Voltage
Power Consumption
Fuse Rating
Dimensions Width
Height
Depth
Weight
Trigger Outputs 1. 2 (Zone)
10dBµ typ.
13dBµ typ.
75dB typ.
69dB typ.
0.2% typ.
0.3% typ.
40dB typ.
70dB ±400kHz
20Hz to 15kHz ±1dB
200uV
50dB
0.7%
20dB
6MHz -3dB
60MHz -3dB
60MHz -3dB
60MHz -3dB
Crystal CS493263
CS8415A Digital Audio Interface up
to 96kHz
CS5360 up to 24-bit/48kHz
CS4396 up to 24-bit/192kHz
105-130V AC, 60Hz only
45W (Watts)
1.0Amp slow-blow 5x20mm,
2.0Amp slow-blow 5x20mm
17 inches (432mm)
6.25 inches (159mm) includes feet
16 inches (408mm) Allow 2 inches
(51mm) behind unit for connections
23 lbs. (10.4kg)
Sequential Delay 50mA @ 12V DC