Operation - Fosgate Audionics FAP T1 User Manual

Operation

To erase a learned command from a button:
1. Press the Source button and SEL buttons simultaneously
until the orange Status LED and the Device button turn on
and remain lit.
2. On the remote control, press the button that is to be
erased.
The orange Status LED will flash continuously and the Device
button will turn off.
3. Press the Light button.
The green status LED will flash twice, then turn to a steady
orange. The Device button will turn on.
Repeat from Step 2 for any other buttons to be erased in the
selected Source mode.
4. To exit, press and hold the Source button and the SEL/PLAY
button simultaneously once again. The orange Status LED
will flash twice and then turn off. The Device button will
turn off.
34
To erase all the learned commands in one device mode:
1. Press the Source button and SEL buttons simultaneously
until the orange Status LED and the Device button turn on
and remain lit.
2. Press the LIGHT button until the red Status LED flashes five
times and then flash green twice.
The Device button will turn off. The Status LED will go to a
constant orange indicating that all the learned information on
buttons in the Device mode have been erased. The Device
button will turn on.
3. To exit, press and hold the Source button and the SEL/PLAY
button simultaneously once again. The orange Status LED
will flash twice and then turn off. The Device button will
turn off.
To erase all the learned commands in all device
modes:
NOTE:This procedure will erase all learned commands on all but-
tons in the CD, TV, DVD, SAT, CBL, VCR and AUX Source
modes.
• Press and hold the TV Source button and the LIGHT button
simultaneously.
The red Status LED will flash continuously. The Status LED will
then flash green once, orange once then turn off, indicating that all
of the learned commands on all of the device modes on the remote
control have been erased.