Function Of Control Panel - HoMedics Circulator Instruction Manual

IB-CB200GB-1213-02_Layout 1 16/12/2013 12:02 Page 9

FUNCTION OF CONTROL PANEL

LCD showing the
intensity level for Sole
– maximum 99 levels
LCD showing the
program in AUTO or
in MODE.
BODY –
BODY +
SOLE -
SOLE +
TIME -
TIME +
AUTO/MODE
Electrode area of the unit and the gel pad
Fig. A
ON/OFF switch button
Decrease the output intensity of body (Available from 1 - 99 levels)
Increase the output intensity of body (Available from 1 - 99 levels)
Decrease the output intensity of Sole (Available from 1 - 99 levels)
Increase the output intensity of sole (Available from 1 - 99 levels)
Decrease the operation time (available from 1-60 minutes)
Increase the operation time (available from 1-60 minutes)
Auto - is the preset program with 14 pattern in cycle running for Foot and 10 pattern in cycle run-
ning for body
Mode - user can fix the program to the exiting massage pattern on the rest of the time
On the device the black colour area on the device which
is the electrode area for the sole. (see. the fig. A).
On the gel pad, the black colour
area on the sticky part is the
electrode area for the body, size is
5 cm x 9 cm. (see. the fig. B)
9
LCD showing the
intensity level for body
– maximum 99 levels
LCD showing the timer