HoMedics Circulator Instruction Manual page 2

IB-CB200GB-1213-02_Layout 1 16/12/2013 12:02 Page 2
QUICK START GUIDE
PLEASE NOTE – THIS DEVICE DOES NOT VIBRATE – IT USES ELECTRICAL IMPULSES, NOT VIBRATION!
For detailed operation of your Circulator please refer to the comprehensive instructions within this
manual.
1
2
3
4
4
5
For a full explanation of setting the intensity, refer to page 14
Remove your Circulator from the packaging. Take out the Remote
Control and remove the screw from the back door using a
screwdriver. Then insert 2 piece AAA batteries into the compartment
as per indication. Then screw up the battery door. Please refer to
page 16 for a step-by-step guide on changing the battery on the
remote control.
Connect the DC adapter to a suitable mains outlet and plug the
small DC socket into the device.
Turn on the power the central display will light up orange and go off.
Remove your footwear and socks or stockings. PLACE YOUR BARE
FEET ONTO THE FOOT PADS. YOUR RIGHT FOOT ON THE RIGHT FOOT
PAD AND YOUR LEFT FOOT ON THE LEFT FOOT PAD. BOTH FEET
NEED TO BE ON THE DEVICE FOR IT TO WORK.
Sit in a comfortable chair. Place your bare feet on the left and right
foot plates. Increase the intensity levels for the foot by pressing the
"SOLE+" or to press "SOLE – " to decrease the intensity. The intensity
level ranges from 0-99, slowly increase the level until you begin to
feel the micro-current stimulation.
2