J10: Wake On Lan Connector; J11: External Audio Connector; J12: Cd-In Audio Connector; J13, J14: Serial Ata (Sata) Connectors - Intel 865G User Manual

J10: Wake On LAN Connector

J10 is a 3-pin header for the Wake On LAN function on the
motherboard. The following table shows the pin out assignments of this
connector. Wake On LAN will function properly only with an ATX
power supply with 5VSB that has 1A.

J11: External Audio Connector

J11 is a 12-pin header that is used to connect to the optional audio cable
that integrates jacks for Line In, Line Out and Mic.
Signal Name
LINEOUT_R

J12: CD-In Audio Connector

Pin #
1
2
3
4

J13, J14: Serial ATA (SATA) Connectors

The SATA connectors support serial ATA 150. Each connector can only
use one serial ATA hard disk. J13 is port 1 and J14 is port 2.
Pin # Signal Name
1 +5VSB
2 Ground
3 LAN Wakeup
Pin #
Ground
LINEIN_R
Ground
Mic-In
Ground
Signal Name
CD Audio R
Ground
Ground
CD Audio L
IB865 User' s Manual
INSTALLATIONS
Pin #
1 2
3 4
5 6
7 8
9 10
11 12
Signal Name
LINEOUT_L
Ground
LINEIN L
Ground
VREFOUT
Protect pin
25