Connecting To A Tv; Channel Settings - Dvd Only - Philips SACD Player Manual

Connecting to a TV

Notes
- Depending on your TV there are various ways you could
connect the player. These are shown in the illustration below.
- Please refer to your TV, VCR, and any other User Manual(s)
as necessary to make the optimal connections.
- Do not connect your SACD-player via your VCR, because
the video quality could be distorted by the copy protection
system.
1 Connect the Euroconnector (TO TV-I/O 6) to the
corresponding connector on the TV using the
Euroconnector cable supplied.
If your TV is not equipped with a Euroconnector
you can select one of the following alternative
connections:
S-Video (Y/C) connection
1 Connect the S-VIDEO OUT (Y/C) socket (7) to the
corresponding socket on the TV using an optional
S-Video cable.
G If you wish to receive the sound via your TV
connect the STEREO OUT Left and Right output
sockets (1) to the corresponding sockets on the TV
using the audio cable supplied.
Video CVBS connection
1 Connect the VIDEO OUT (CVBS) socket (8) to the
corresponding socket on the TV using the video
cable supplied.
2 If you wish to receive the sound via your TV
connect the STEREO OUT Left and Right output
sockets (1) to the corresponding sockets on the TV
using the audio cable supplied.
MAINS
RIGHT
VOLTAGE SELECTOR
220-240V 100-120V
FILTER
1 2 3
GND
DIGITAL AUDIO OUT
Dolby Digital/
DTS/MPEG/PCM
OPT OUT DIG OUT
16 PREPARATION
1 8 7 6
HIGH QUALITY STEREO/MULTICHANNEL AUDIO OUT
LEFT RIGHT SURR. LEFT SURR. SUBW CENTER
I
I
AUX- /O
VIDEO OUT VIDEO OUT
TO TV/VIDEO
R L II
TO TV- I /O
(CVBS) ( Y/C )
AUDIO VIDEO OUT S-VIDEO

6 Channel settings - DVD only

Front speaker
L (Large) : When the front speakers can reproduce low
frequency signals below 120Hz
S (Small) : When the front speakers cannot produce
low frequency signals below 120Hz
Center Speaker*
L (Large) : When the center speaker can reproduce
low frequency signals below 120Hz
S (Small) : When the center speaker cannot produce
low frequency signals below 120Hz
Off : When the center speaker is not connected
Surround speakers
L (Large) : When the surround speakers can reproduce
low frequency signals below 120Hz
S (Small) : When the surround speakers cannot
produce low frequency signals below 120Hz
Off : When the surround speakers are not
connected
Subwoofer
On : When you connect a subwoofer
Off : When a subwoofer is not connected
* You can use your TV as center speaker. Please refer to
your TV User Manual to check if your TV can reproduce low
frequency signals below 120Hz. If not, set Center Speaker to
S(small). When Center Speaker is selected in the 'Personal
Preferences' menu, the sound from both center speaker and
audio L/R as well as the audio from the Euroconnector will
contain the center speaker audio.
CENTER
FRONT
LEFT
Reference
listening
position
LEFT
SURROUND
SUBWOOFER
FRONT
RIGHT
RIGHT
SURROUND