Connecting Headphones - Philips AZ 7460 Instructions For Use Manual

ACCESSORIES
Connecting headphones
(supplied)
Connect the supplied headphones (16 ohms/
3.5mm jack plug) with the LINE OUT / O jack.
Note: Use this jack also for connecting your Hifi system
(signal lead) or your car radio (adapter cassette or
signal lead). In both cases, the volume of the CD
player has to be set to maximum position (10).
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a
hazard and it is illegal in many countries. Even if your headphones are an open-air
type designed to let you hear outside sounds, do not turn up the volume so high
that you cannot hear what is going on around you._
.20 - 20000 Hz
..typ. 95 dBA
.typ. 70 dBA
..typ. 0.05 %
..Bitstream D/A Converter
..2xl.5V.typeAA/LR6/UM3
.134 x 30.5x154 mm
.approx. 250/290 gms
TECHNICAL DATA
Frequency range.
Signal-to-noise ratio..
Channel separation..
Total harmonic distortion.
Conversion.
Batteries.
Dimensions (wxhxd).
Weight (without/with batteries).
8