Access Control; Parental Control (Dvd-Video Only) - Philips SACD Player Manual

Access control; Parental control
(DVD-Video only)
Movies on DVD discs may contain scenes not suitable
for children. Therefore discs may contain 'Parental
Control' information which applies to the complete disc
or to certain scenes on the disc. These scenes are rated
from 1 to 8 and alternative, more suitable scenes are
available on the disc. Ratings are country dependent. The
'Parental Control' feature allows you to prevent discs
from being played by your children or to have certain
discs played with alternative scenes.
Activating/Deactivating Parental Control
In Stop mode, select Access Control in the
1
Features menu s using the w/v (down/up) keys
and press u (right cursor).
Access control
Status window
Low power standby
Sound mode
Display
PBC
2 Enter your 4-digit PIN code. If necessary enter the
code a second time.
Move to Parental Level using the w/v (down/up)
3
keys.
4 Move to the Value Adjustment bar using the u (right
cursor) key.
5 Then use the w/v (down/up) keys or the numerical
keys 0-9 on the remote control to select a rating
from 1 to 8 for the disc inserted.
Rating 0 (displayed as '– –'):
Parental Control is not activated. The Disc will be played
in full.
Ratings 1 (child safe) to 8 (adults only):
The disc contains scenes not suitable for children. If you
set a rating for the player, all scenes with the same
rating or lower will be played. Higher rated scenes will
not be played unless an alternative is available on the
disc. The alternative must have the same rating or a
lower one. If no suitable alternative is found, play will
stop and the 4-digit code has to be entered.
-
26 OPERATION VIDEO
enter code
Access control
Status window
Low power standby
Sound mode
Display
PBC
6 Press OK or t (left cursor) to confirm and press t
(left cursor) again to exit the menu.
Country
In Stop mode, select Access Control in the
1
Features menu s using the w/v (down/up) keys
and press u (right cursor).
2 Enter your 4-digit Pincode.
Move to Change Country using the w (down) key.
3
4 Press the u (right) key.
5 Select a country using w/v (down/up cursor).
6 Press OK or t (left cursor) to confirm and press t
(left cursor) again to exit the menu.
Changing the 4-digit code
In Stop mode, select Access Control in the
1
Features menu s using the w/v (down/up) keys
and press u (right cursor).
2 Enter the old code.
Move to Change Code using the w (down) key.
3
4 Press the u (right) key.
5 Enter the new 4-digit PIN code.
6 Enter the code a second time and reconfirm with
OK.
7 Press t (left cursor) to exit the menu.
Note: If you forgot your code, press 9 STOP four times
while in the access control PIN code box and exit with OK.
Access control is now switched off. You can then enter a new
code (twice!) as described above.
Child lock
Parental level
Change country
Change code