Basic Recording; Basic Recording From A Tv; Instant Timer Recording - Philips DVDR630VR Owner's Manual

Basic Recording from a TV

Follow the instructions below to record a TV program.
Recording starts immediately and continues until the disc or
tape is full or you stop the recording.
Switch on the Recorder, select the device (VCR
1 1
or DVD) for Recording and load a recordable
disc or tape.
Also make sure that the TV input is set to this recorder.
Set a recording mode as necessary by pressing
2 2
REC MODE repeatedly.
DVD: SP (Standard quality), LP (Low quality),
XP(High quality), EP (Extended quality)
VCR: SP (Standard Play), LP (Long Play)
Use CHANNEL (v/V) on the front panel or v/V
3 3
on the remote control to select the TV channel
to record.
Use AUDIO to select the audio channel to
4 4
record.
The table below shows what will be recorded on the
different settings for different types of broadcast. The last
column (Monitor Audio) shows what you'll hear as it is
recording.
TV Selected Audio Broadcast Audio
Broadcast Tape
Audio
L Ch
STEREO STEREO/MAIN STEREO
STEREO/SUB STEREO
MONO/MAIN MONO
MAIN+SUB STEREO/MAIN MAIN
STEREO/SUB MAIN
MONO/MAIN MAIN
MONO STEREO/MAIN MONO
STEREO/SUB MONO
MONO/MAIN MONO
Press REC (z) once.
5 5
Recording will start. (The REC indicator lights in the
display window.)
Recording continues until you press STOP (
disc (or tape) is full.
To record for a fixed length of time, see Instant Timer
Recording on right.
Press STOP (x) to stop recording.
6 6
Monitor
+R or +RW Audio
mode
R Ch L Ch R Ch
STEREO STEREO
STEREO STEREO
MONO MONO
SUB MAIN MAIN MAIN
SUB SUB SUB SUB
SUB MAIN MAIN MAIN
MONO MONO
MONO MONO
MONO MONO
x
) or the

Basic Recording

Instant Timer Recording

Instant Timer Recording allows you to make a recording
easily of a preset length without using the program
timer.
Follow steps 1-5 as shown left (Basic Recording
1 1
from a TV).
Press REC (z) repeatedly to select the record-
2 2
ing time length.
Recording starts after the first press.
DVD: Each subsequent press increases the recording
time by 10 minutes within free space.
VCR: Each subsequent press increases the recording
time by 30 minutes. Please confirm the VHS tape has
enough remaining time to be recorded before recording.
Input: PR 09
MONO SP
Input: PR 09
MONO
SP
Instant Timer Record Menu
Checking the Recording Time
Press REC (z) or DISPLAY once to check the record-
ing time. The recalled setting will automatically return to
the TV screen for a moment.
Also, remaining time of recording is shown in the dis-
play window.
To Extend the Recording Time
The recording time can be extended anytime by press-
ing REC (z).
Each subsequent press increases the recording time by
10 minutes (DVD) within free space or 30 minutes
(VCR).
To Pause the Recording
1 Press PAUSE/STEP (X) to pause the disc or tape
during recording.
2 When you want to continue recording, press
PAUSE/STEP (X) or REC (z).
otes
• If you press PAUSE/STEP (X) during the Instant
Timer Recording, it will be canceled.
• The Recorder will automatically power off
Instant Timer Recording
when the
To record one TV program while
watching another
1 Press MODE to select the TV mode during recording.
The TV indicator appears.
2 Using the TV remote controller, select the channel to
be viewed.
ips (VCR mode only)
X
Always use PAUSE/STEP ( ) for best results when making
changes during recording .
For example: To change channels during recording, first press
X
PAUSE/STEP ( ) to put the unit in pause mode. Then select
the desired channel on the Recorder, and press PAUSE/STEP
X
( ) again to resume recording.
DVD
2H 01M Free
00:09:05
30min Rec.
VCR
0:17:32
120min Rec.
ends.
43