Disc Finalize; Disc Label - Philips DVDR630VR Owner's Manual

Disc Finalize

Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
LIST/DISC MENU or TITLE.
Caution
• When DVD+R and DVD+RW recording, you've
finalized a disc recording, you can't edit or record
anything else on that disc except DVD+RW.
Disc Initialize
Disc Finalize

Disc Label

Disc Protect
PBC
AutoPlay
Follow steps 1-3 as shown on page 28 (Disc
1 1
Initialize).
Use v / V to select the Disc Finalize option.
2 2
Press B to move to the third level.
3 3
Finalize is highlighted.
Press ENTER.
4 4
Finalize menu appears.
Finalize
Do you want finalization?
OK
Select OK then press ENTER.
5 5
The recorder starts finalizing the disc.
ote
How long finalization takes depends on the type of disc,
how much is recorded on the disc, and the number of
titles on the disc. A disc recorded can take up to 8 min-
utes or more to finalize.
ip
If you load a DVD+RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
Disc Finalize menu. After doing this, you can edit and
re-record onto the disc.
Finalize
Unfinalize
Cancel
Before Operation (Continued)
Disc Label
Use this to enter a name for the disc. This name
appears when you load the disc and when you display
disc information on-screen.
• The disc name can be up to 32 characters long.
• For discs formatted on a different Recorder, you will
see only a limited character set.
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
PBC
AutoPlay
Follow steps 1-3 as shown Disc Initialize on
1 1
page 28.
Use v / V to select the Disc Label option.
2 2
Press B to move to the third level.
3 3
Edit icon is highlighted.
Press ENTER.
4 4
Keyboard menu appears.
Language
English/Latin Capital
1 2 3 4 5
A B C D E
K L M N O
U V W X Y
Space Delete
Enter a name for the disc. Use v V b B to select
5 5
a character then press ENTER to confirm your
selection. Refer step 3 as shown on page 22
(Station Rename).
Remote control buttons for entering a name
N (PLAY): Inserts a space at the cursor position.
X (PAUSE/STEP): Deletes the after character at the
cursor position.
x (STOP), CLEAR: Deletes the previous character
at the cursor position.
b / B : Moves cursor to left or right.
' '
Numbers (0~9): Enters the character of correspon-
ding location on the selected column.
LIST/DISC MENU, DISPLAY: Switches the keyboard
type (English/Latin Capital, English/Latin
Lowercase, Symbols)
Choose OK then press ENTER to fix the name
6 6
and return to the Setup menu.
Press SYSTEM MENU to exit the menu.
7 7
Edit
6 7 8 9 0
F G H I J
P Q R S T
Z
OK Cancel
29