St2-Kp And Cav6.6 - Russound ST2 Smart Tuner Instruction Manual

ST2 SETUP AND CONNECTIONS
ST2-KP AND CAV6.6 CONNECTIONS
ST2-KP Connections to ST2 Tuner (Non-RNET Systems)
The diagram depicts a standard ST2-KP keypad connection to the keypad port on the back of the
ST2. The keypad uses a 110 punchdown connection and an RJ-45 T568A connection to the tuner.
Source Connections with CAV6.6 Controller/Amplifier
The diagram depicts a typical setup using the ST2 Tuner with a CAV6.6 amplifier. Each tuner in the
ST2 unit must be connected as a separate source for audio inputs. UNO-S2 keypads are connected
to the CAV6.6 keypad ports, NOT the ports on the ST2 Tuner.
10
UNO-S2
keypads
ST2
Smart Tuner
NEWMARKET, NH U.S.A.
LINK RS-232 K EYPAD P ORTS
INTERFACE
I O
N UT
RCA Cable
CAT-5 Cable
AM loop antenna AM loop antenna
L OOP L OOP
T UNER 2
A NTENNA A NTENNA
FM C OAX A O FM C OAX
UDIO UTPUT
L R
IR IR
Serial#
T UNER 1
A O
UDIO UTPUT
ST2 Tuner
L R
12VDC 1.5A
CAV6.6