Using The Timer Functions - Integra DSR-7.3 Instruction Manual

Using the Timer Functions

This manual uses the 24-hour display to
describe how to set the clock. The clock
display may also be switched to a AM/PM
display.
Caution
• In the event of a power outage, or the power cord
being removed from the socket, the clock display
will disappear. Please reset the time again.
• When using the clock functions, make sure that the
power cord is connected to a proper power supply.
Setting the current date and time
1
Press Timer repeatedly until
Timer
"CLOCK" appears in the display on
the unit, then press ENTER.
«
ENTER
2
Press the cursor buttons (5/∞) to
select a day of the week, then press
ENTER.
While the desired day of the week is
ENTER
flashing, press ENTER.
«
Days of the week are displayed as follows:
ENTER
SUN (Sunday)
MON (Monday)
TUE (Tuesday)
WED (Wednesday)
3
To switch the clock display 24-hour/
AM/PM, press Display.
4
Press the cursor buttons (5/∞) to
set the time.
ENTER
Tip
When using the 24 hour display, if you first
press Mode DVD, you can also use the
number buttons to set the time.
THU (Thursday)
FRI (Friday)
SAT (Saturday)
j
5
Start the clock.
Match the date, time etc. then press
ENTER. The display switches back to the
ENTER
function.
Display switches back to the function.
I Displaying the current time
Press Clock on the remote controller.
If the clock is not set, "ADJUST" flashes. Please set the
clock.
When the power on, press Clock on the remote control to
display current date and time. Press Clock again to return to
the previous display.
When the unit is in standby mode, press Clock on the remote
control to display the current date and time. The display will
disappear after 7 seconds. (Power saving mode)
Display disappears after 7 seconds
Clock
Display
Step/ Slow
C H ENTER VOL
Tun
2/3/5/∞
T-D/ ST Muting
Surround A.Control
ENTER
Repeat A- B
Timer
Late Night Timer
Audio Angle Subtitle FM Mode
Last M Program Random Clear
SP Setup Test Tone CH Sel
1 2 3
SW Mode Distance
4 5 6
IPM T- D Setup Up/ Down
7 8 9
+10 0 Search
-- / --- Enter
RC- 507 M
Blinking
«
«
41