Inserting A Pc Card - Panasonic CF-51 Series Reference Manual

PC Cards
Inserting/Removing the PC Card

Inserting a PC Card

1
Simply slide the PC Card right-side-up until it snaps into place.
Refer to the operating instructions of each card on how to insert the card.
CAUTION
Before connecting the PC card, change the multimedia pocket device in accordance
with the media in which the driver of the PC card exists. Once a screen to install a
driver is displayed, the multimedia pocket device cannot be recognized even if it is
properly installed.
When using PC cards for connecting peripheral devices (SCSI, IEEE1394, etc.),
install using the following procedure (one example).
A
Connect the peripheral device to the card.
B Turn the device on.
C Slide the card in until it snaps into place.
When inserting a card, do not force the card in if difficulty is encountered. Depending
on the shape of the card, a segment may remain protruding from the slot after
insertion. Do not try to force the card all the way in. You may damage the slot,
making it impossible to remove the card.
56