Connecting Ieee 1394 Devices; Turn On The Computer - Panasonic CF-51 Series Reference Manual

IEEE 1394 Devices

Connecting IEEE 1394 devices

Removing IEEE 1394 devices
A digital video camcorder or other IEEE 1394 standard device can be connected to the
computer.
1

Turn on the computer

and the IEEE 1394 device.
2
Connect the IEEE 1394 device to the IEEE 1394 interface connector (A).
Refer to the instructions manual included with the IEEE 1394 devices.
NOTE
For more detailed information, refer to the operation manual of the IEEE 1394 device.
You may need to install drivers compatible with the OS you are using for your IEEE
1394 device. Follow the on-screen instructions and refer to the operation manual for
the IEEE 1394 device on how to install the driver.
Before connecting an IEEE 1394 device, change the multimedia pocket device in
accordance with the media in which the driver of the IEEE 1394 device exists. Once a
screen to install a driver is displayed, the multimedia pocket device cannot be
recognized even if it is properly installed.
CAUTION
When an IEEE 1394 device is connected to the computer and the power for both the
device and the computer is on, do not power off the IEEE 1394 device.
1
Power off the computer
and remove the cable from the IEEE 1394 interface connector
Down")
of the computer.
2
Power off the IEEE 1394 device and remove the cable.
(⇒Operating Instructions "Starting Up/Shutting Down")
(⇒Operating Instructions "Starting Up/Shutting
68