PC Cards
Inserting/Removing the PC Card
Latch
Cover
Label-side up
Inserting a PC Card
Unlock the cover by sliding the latch to the right.
Slide the latch down, and then without releasing it, open the cover as illustrated.
Simply slide the PC Card in until it snaps into place. Refer to the operating
instructions of each card on how to insert the card (insertion is typically label-
side up)
CAUTION
When using a PC Card to connect a peripheral device (SCSI, IEEE 1394, etc.):
1
Connect the peripheral device to the card.
2
Turn the device on.
3
Slide the card in until it snaps into place.
When inserting a card, do not force the card in if difficulty is encountered.
Depending on the shape of the card, a segment may remain protruding from
the slot after insertion. Do not try to force the card all the way in. You may
damage the slot, making it impossible to remove the card.
43