Philips DSR 5600 User Manual page 81

Note: some of the functions described in the next pages may not be available or have the same behaviour for all brand of the same
appliances.
Important Notes:
1- You need to reset the STB mode to the factory mode.
If you have made a mistake changing the default setting of the STB mode resulting in the impossibility to control your satellite receiver,
then please refer to above description.
2- Battery change.
If the battery change takes more than 1 minute the remote control may return to the “Philips brand factory settings”. Therefore you
shall proceed with a new setting of your remote control, with the help of the table above, for your non Philips branded appliances.
3- All manufacturers are concerned about the constant improvement of their products. Although the RC2585108 is compatible with
most of the equipment of the following list, Philips cannot guarantee its operation with the complete range of products on the market.