Philips DSR 5600 User Manual page 60

ASTRA
DiSEqC switch
(4 inputs)
Satellite recever
Note:
- For more details on possible option settings consult the paragraphs 8.4.2 "Installation / Antenna configuration" and 8.4.3 "Installation /
LNB Configuration". The proper satellite installation requires:
Matching LNB number with satellite name (for instance Astra 19.2 allocated to LNB1)
Right physical connection in between the LNB aiming at a given satellite and the appropriate DiSEqC switch input. In the menu
"Installation / LNB Configuration" (8.4.3 section): LNB1 means "the LNB which is connected to DiSEqC switch input 1, LNB2
means "the LNB which is connected to DiSEqC switch input 2", etc…
- If your installation includes an assembly incorporating 2 LNB's combined with a DiSEqC switch in one block (so called mono-block),
consult its user manual to properly allocate each satellite to the relevant DiSEqC switch inputs (Hot Bird respectively Astra 19.2 East
satellite might be allocated to input 1 respectively input 2 of the DiSEqC switch). Make sure Satellite name (Hot Bird for instance) is
allocated to the right LNB number (LNB1 for instance).
HOT BIRD
TELECOM
A B C D