●
●
●
●
●
●
Note: Your satellite receiver can only be updated via Astra
19.2° East satellite. Therefore if you want to benefit from
further upgrades you, at least, have to install your receiver for
the reception of the Astra 19.2° East satellite.
Note:If you have a DiSEqC 1.0 switch in your antenna set up
you can proceed with this quick installation, provided you
connect directly the plug of the cable coming from your
antenna aiming at Astra 19.2° East to the LNB IN socket of
your satellite receiver. Otherwise refer to chapter 5.3.1
V W
Note: During power up after putting the rear panel mains
switch to on, it is normal for the front display to turn off for few
seconds. It shall turn on later on by showing MHP .
Note: To change Language Options, , see the 8.3.2 section
later in this manual.
➤
➤
➤
➤
C B
V W