Pc Connection - Orion 26MT6000 Operating Instructions Manual

PC connection

Follow these steps: On your PC monitor choose a resolution of 1920 × 1080 at 60Hz and save this
configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Select PC input
Switch on the LCD-TV.
Select the PC input mode (see page 12).
Note:
• If no signal or a signal with a non-
supported resolution is connected, No
Signal is displayed
• As this LCD-TV is not a PC monitor
correct display cannot be guaranteed for
every PC / graphics card.
• Digital PC connection to HDMI-input is
not supported.
• If by any chance the PC should create
a picture on the HDMI-input then there
can be no guarantees for its correct
representation. Digital PC connection
is not an assured function of this TV
appliance.
Supported PC resolutions
resolution
640x480
800x600
1024x768
1280x720
1280x768
1360x768
1280x1024
1440x900
1920x1080
Selected Items
PC
3BR2901A_EN.indd 23 3BR2901A_EN.indd 23
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
TV (Rear view)
to PC/DVI AUDIO input
Example: Adjust the contrast.
1
fps (Hz)
During PC mode press MENU.
60
60
60
60
2
60
Select
60
adjust Contrast.
60
3
60
Press RETURN several times to return to the normal
60
screen.
Auto Adjust
Hor Position, Ver Position, Phase and Clock are
adjusted automatically as per the input PC video signal.
• When PC-input mode was selected and a PC-signal
was input, Auto Adjust will be performed automatically.
Hor Position To adjust the horizontal placing of the image.
Ver Position To adjust the vertical placing of the image.
Phase Eliminates the horizontal (PHASE) interfering lines.
Clock Eliminates the vertical (CLOCK) interfering lines.
Audio cable (not supplied)
VGA Cable (not supplied)
/Contrast, then press ENTER. Press
Setup hint
PC
or to
23
3/8/11 12:14:28 PM 3/8/11 12:14:28 PM