Epson PowerLite Home Cinema 8700 UB User Manual page 36

■ Brightness
Image > Brightness
Adjust the brightness so it's suitable for your viewing conditions. For example, if you're
projecting in a brightly lit room or onto an especially large screen, you may need to
increase the brightness. Decrease the brightness for dark rooms or small screens; this also
reduces power consumption and fan noise, and helps to prolong the life of the lamp.
■ Contrast
Image > Contrast
This setting adjusts the difference between bright and dark areas.
■ Auto Iris
Image > Auto Iris
Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).
When this setting is on, the light output is automatically adjusted according to the
brightness of the image. Select either
you would like the projector to respond to changes in the brightness of the image. The
setting is stored separately for each image source and color mode.
■ Setup Level
Signal > Advanced > Setup Level
Note: This setting can be used only when an NTSC signal is being input through the Video or
S-Video port, or when a video signal is being input through the Component video ports.
This setting adjusts the threshold at which dark areas of the image are rendered black
(0 IRE). For compatibility with most DVD and video equipment sold in the United
States, leave this setting at 0%. Check your video equipment's specifications to be sure of
the correct setting.
■ EPSON Super White
Signal > Advanced > EPSON Super White
Note: This setting can be used only when a composite video, S-Video, or component video
signal is being input and the Color Mode is set to THX (Home Cinema 8700 UB), Natural (Home
Cinema 8350), Theatre (Home Cinema 8700 UB), Cinema (Home Cinema 8350), Theatre
Black 1 (Home Cinema 8700 UB), or Theatre Black 2 (Home Cinema 8700 UB) (see page 28).
If bright parts of the image are washed out or overexposed (when the input signal
contains values over 100 IRE), turn this setting on to compensate.
36
Making Detailed Adjustments
or
Normal High Speed
to indicate how quickly