Connecting To Cable Tv Signal - Toshiba RD-XS52SU Owner's Manual

Connections

Connecting to cable TV signal

Choose one of the below according to your usage of the cable box.
For watching received channels, connect to the TV via the audio/video cable.
HDMI OUTPUT
R L VIDEO S-VIDEO
UTPUT
INPUT1
TPUT INPUT3
R L VIDEO S-VIDEO
HDMI OUTPUT
R L VIDEO
ONENT OUTPUT
OUTPUT
R L VIDEO S-VIDEO
OUT
HDMI OUTPUT
VIDEO S-VIDEO
INPUT1
INPUT3
CHANNEL
CHANGE
VIDEO S-VIDEO
IR
VHF / UHF
22
RF IN
(FROM ANT.)
RF OUT
(TO TV)
CHANNEL
CHANGE
IR
VHF / UHF
Incoming cable
RF IN
(FROM ANT.)
S-VIDEO
INPUT1
RF OUT
(TO TV)
INPUT3
CHANNEL
CHANGE
IR
VHF / UHF
Cable box
3CH
4CH
Incoming cable
IN
RF IN
(FROM ANT.)
RF OUT
(TO TV)
Cable box
3CH
4CH
OUT IN
Incoming cable
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (only when you connect a cable-compatible
TV).
You will need to:
• to record a channel while watching another, select a
desired channel on the TV (only when you connect a
cable-compatible TV).
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable box.
• to record an unscrambled channel while watching a
scrambled channel, select a desired cable channel via
the cable box.
This set-up will allow you to:
– record any channels through the cable box.
You will need to:
• set "Cable Box/DBS" of "Set Top Box setting" to
"C.Box". page 42
• set "Select input" of "Set Top Box setting"to "3CH" or
"4CH". page 42
• select a desired cable channel via the cable box.
• while the recorder is turned off, set TV channel to the
output channel of the cable box.
You can control cable channels from the recorder.
Perform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder.
2) Set "IR control" of "Set Top Box setting" to "On".
page 42
page 25