Toshiba RD-XS52SU Owner's Manual page 105

• Setting "On" may create many chapters, and their
number may reach the maximum allowed. At that
point, no more chapters can be created. In this case,
decrease the chapters, for example by combining
chapters ( page 95).
• This feature is not available on DVD-R discs. To
create chapters automatically during recording on
DVD-R discs, set "DVD-Video:CHP create." (
162).
Genre setting
You can set a genre before setting programmed
recording.
To see the registered list, refer to Genre setting
( page 163).
Set the genre according to recording contents.
The selection you have made for the timer program
is shown at the bottom of the display.
Shifting a time period of a recording (Time
Shift)
If a prior TV program extends beyond its scheduled
time and into one that you programmed, you can shift
the programmed start and end time of the recording.
1:00pm
Time Shift
20 minutes
extend
1:20pm
1) Press REC MENU.
REC MENU appears.
2) Press / to select a timer program you want
to shift the time period.
3) Press EXTEND.
"Start time" and "End tme" are ready to be input.
4) Press EXTEND repeatedly.
Each time you press the button, "Start time" and
"End time" is shifted in 10 minutes intervals to, up
to 60 minutes later.
5) Press ENTER.
6) Press REC MENU to exit.
Note
• After you shifted the time of a timer program which will be
repeated daily or weekly, you should restore the original
start/stop time for future recordings.
Adding a timer program
1) Press REC MENU.
REC MENU appears.
2) Press
3) Press
4) When complete, press ENTER.
5) Press REC MENU to exit.
page
Note
• While the recorder is preparing for or executing a
programmed recording, you cannot add a timer program
which will start within 5 minutes and 15 seconds from the
current time.
Deleting a timer program
1) Press REC MENU.
2) Press
3) Press QUICK MENU.
4) Press
5) Press REC MENU to exit.
1:54pm
Note
• You cannot delete a timer program while another is
executed.
2:14pm
Correcting a timer program
1) Press REC MENU.
2) Press
3) Press
4) Press ENTER.
5) Press REC MENU to exit.
Important
• You cannot correct a timer program within 5 minutes before
the recording start time. You can only delete the timer
program.
Note
• You can program a timer recording whose start time has
already passed, unless the another program recording will
start within 5 minutes. The portion of the program before
the recording starts cannot be saved.
to select a blank line, then press
ENTER.
/ to select the item, then press
ADJUST to set the item.
REC MENU appears.
/ to select a timer program you want
to delete.
Quick Menu appears.
/ to select "Program cancel", then
press ENTER.
Check the message, then delete the entry.
REC MENU appears.
/ to select a timer program you want
to change, then press ENTER.
/ to select an item, then press
ADJUST to set the item.
The modification is registered.
45