Maintenance / Reference; Factory Default Settings; Reset - Alinco DR-135T MkII Instruction Manual

10. Maintenance / Reference

Reset

Resetting the transceiver returns all programmed contents to their factory default setting.
If any problems persist, resetting may overcome them and return the transceiver to normal opera-
tion.
Reset Procedure
While holding the FUNC key down, turn the power on.
All segments of the LCD will be displayed, then default set-
tings are displayed.
Note: Take special care when resetting because all settings are initialized.

Factory Default Settings

VFO frequency
CALL frequency
Memory channel 0-99
Offset direction
Offset frequency
Channel step
Tone setting
Tone frequency
DCS setting
DCS code
Output power
Keylock setting
TOT
APO
Squelch level
DR-135TMK
145.00 MHz
145.00 MHz
-
-
600 kHz
5 kHz
-
88.5 Hz
-
023
HI
OFF
OFF
OFF
0
All LCD segments
41