Maintenance / Reference; Reset; Factory Default Settings - Alinco DR-635T Instruction Manual

Maintenance / Reference

Reset

Resetting the unit returns all programmed contents to their factory default settings.
1.
Press the PWR key for more than 1 second with
the FUNC key pressed and turn the power on.
2.
All segments of the LCD will be displayed, then
default settings are displayed.
IMPORTANT: While holding the FUNC key down, turn the power on. All segments of the LCD will be
displayed, then default settings are displayed.

Factory Default Settings

MAIN band
VFO frequency (VHF)
(UHF)
CALL frequency (VHF) 145.00MHz
(UHF)
Memory channel
Offset direction
Offset frequency (V/U) 600kHz/5MHz
Channel step
Channel step (FM)
Tone-squelch setting
Tone frequency
DCS setting
DCS code
Output power
Scan resuming condition
Beep volume setting
Time-Out-Timer
TOT penalty
APO
Tone burst sound setting ALERT
Clock shift setting
Bell setting
Busy-Channel-Lock-Out setting OFF
Theft Alarm setting
Display color setting
Dimmer setting
Squelch level
DR-635T DR-635E
VHF VHF
145.00MHz 145.00MHz
445.00MHz 435.00MHz
145.00MHz
445.00MHz 435.00MHz
- -
- -
600kHz/7.6MHz
5kHz 12.5kHz
100kHz 100kHz
- -
88.5Hz 88.5Hz
- -
023 023
HI HI
busy busy
2 2
OFF OFF
OFF OFF
OFF OFF
1750Hz
OFF OFF
OFF OFF
OFF
OFF OFF
3 3
4 4
02 02
DCS TNC
AM MiLo Nar
SUB
SQL
BUSY 1 3 5 7 9 BUSY
All LCD segments
R
57