Maintenance / Reference; Reset - Alinco DR-135TMkIII Instruction Manual

10. Maintenance / Reference

Reset

Resetting the transceiver returns all programmed contents to their factory default setting.
If any problems persist, resetting may overcome them and return the transceiver to normal opera-
tion.
Reset Procedure
While holding the FUNC key down, turn the power on.
All segments of the LCD will be displayed, then default set-
tings are displayed.
Note: Take special care when resetting because all settings are initialized.
Factory Default Settings
VFO frequency
CALL frequency
Memory channel 0-99
Offset direction
Offset frequency
Channel step
Tone setting
Tone frequency
DCS setting
DCS code
Output power
Keylock setting
TOT
APO
Squelch setting
46
DR-135 DR-135
TMkIII EMkIII/FXE
145.000 MHz 145.000 MHz
145.000 MHz 145.000 MHz
- -
- -
600 kHz 600 kHz
5 kHz 12.5 kHz
- -
88.5 Hz 88.5 Hz
- -
023 023
HI HI
OFF OFF
OFF OFF
OFF OFF
2 2
DR-235 DR-435
TMkIII TMkIII
223.500 MHz 445.000 MHz
223.500 MHz 445.000 MHz
- -
- -
1.6 MHz 5.0 MHz
5 kHz 5 kHz
- -
88.5 Hz 88.5 Hz
- -
023 023
HI HI
OFF OFF
OFF OFF
OFF OFF
2 2
All LCD segments
DR-435
EMkIII/FXE
435.000 MHz
435.000 MHz
-
-
5.0 MHz
12.5 kHz
-
88.5 Hz
-
023
HI
OFF
OFF
OFF
2