Peripheral Test - Panasonic CF-07 Service Manual

Speaker test, VESA test
The speaker test involves listening to music and choosing OK or Not okay. The VESA test involves looking at the display to see
if it is satisfactory then choosing OK or Not okay.
Serial loop back test
The Automatic test´s initial settings are set so that the serial loop back test will be executed. Connect the serial loop back jig
and then perform the test.
(This test is not executed on default mode)
Diagnostics result
If no errors occur: The screen shows the word "Pass" in large letters.
If errors occur: The test is stopped when an error occurs and the error message is displayed.
For explanations of error messages, see Error Messages and Problem Categories (section 4.5).
Quitting the test
At the screen shown below, simultaneously press the ALT and X keys.

3. Peripheral Test

Test execution
From the menu screen shown below, be sure to choose the following items and press Enter:
3. Parallel test
4. CD-ROM test
Input screen
menu screen
16-3