Outline Of Self Diagnostic Test; Automatic Test; Peripheral Test; Test Selection - Panasonic CF-T4HWETZBM Service Manual

5. Self Diagnosis Test
1. Floppy disk is included for the self-diagnostic tests that should be performed before using this product.
2. Connect External Floppy Disk Drive (FDD) to USB port for diagnosis test.
Important notice
System password
This product has a password function. If this function is turned on, the self-diagnostics tests will not work.
You will need ask the user for the password before performing the self-diagnostics.
5.1. Outline of Self Diagnostic Tests
Return the setup
contents to default
Choose test from
the menu screen
to start the test.
Caution:
After completing repairs, be sure
to carry out the Automatic test
and Peripheraltest.
<Automatic test>
Tests selected (O) from the test
item list will be performed in
succession.
1. DIAG on FD
Problems in the unit are located and divided according
to error messages that occur during testing.
Insert the diagnostics floppy disk
•œ Starting up the setup utility
‡@ Turn on the power.
‡A When "Panasonic Press F2 to enter setup" appears
on the screen, press F2.
‡B Press "•¨" to select •u Exit•v
‡C Press "•« " to select •u Get default value•v
‡D Press Enter.
‡E Choose Yes for "Load default Configuration now?"
‡F Select "Save Values & Exit" and press Enter.
‡G Choose Yes for "Save Configuration changes and exit now?"
and press Enter.
•œ Menu Screen 1
1. DIAG on FD
2. LAN test
3. SD I/F test
4. Modem test
5. Wireless LAN test (Wireless LAN Model only)
Q. Quit
Select please [1, 2, 3, 4, 5, Q]?
<Peripheral test>
The parallel devices can be tested.
2. LAN test
3. SD I/F test
4. Modem test
5. Wireless LAN test
(Wireless LAN Model only)
22
<Test selection>
Specifc tests required can
be freely selected and
performed from the test item
list.
Be sure to carry out the Selection
test only when necessary.