Advertisement
POWER AND VIDEO OUTPUT JACK
A center pin positive barrel connector is available for AC or DC voltage (12vdc or 24vac).
A BNC connector provides an analog video output.
INSTALLATION
1. Install the camera on the bracket and tighten screws.
2. Connect the 75Ω coaxial cable to a DVR or Monitor input.
3. Attach the power cable.
4. Adjust the camera position and angle to cover the desired field of view.
Note: The camera is supplied with the focus pre-set, however, lens focus
may be adjusted if needed.
4
199.7
mm
88.0
mm
Advertisement
