Live Viewing Mode; Playback Mode - Lorex LH330 Edge2 Series Instruction Manual

Live Viewing Mode

By default, the Client Software
launches in Live Viewing
mode.
To use Live Viewing:
1 Click
.
2 Click the View buttons (for
example, ) to view in
Quad, 9-way split, or 16-way
split (16-way split available on
16-channel only).
3 Click the Channel buttons
view channels in full-screen.
NOTE: Audio is not available in Live Viewing.

Playback Mode

Use the Playback mode to view recorded video from
your DVR. Use the Pop-up Calendar to select recorded
video from a specific date and time.
NOTE: Only the ADMIN and USER2 accounts may access
Playback mode.
To use remote playback:
1 Click .
NOTE: Depending on your network connection, please allow a few moments for the system
to switch to playback mode.
2 Click the Channel buttons to select the channel you want to view.
3 Click to open the Pop-up Calendar to select the date and time.
4 Click , ,
NOTE: When a channel with audio is selected, click
Audio-enabled camera (not included) or self-powered (not included) microphone
must be connected and configured. For details, see "Appendix I: Recording and
Playing Audio" on page 115.
8-channel model shown
to
, to control playback.
PC and Mac Client Software for Remote Viewing
Channel
Playback controls
to mute / un-mute audio.
View
buttons
Channel
buttons
61