Specifications - Yamaha DG60-112 Service Manual

SPECIFICATIONS

Digital Section
Complete Digital Signal Processing
Amplification Type: Internal 8 Channel Preset
Digital Reverb (SPRING)
Speaker Simulator (LINE OUT)
Analog Section
60 W Solid State Power Amp
30 cm Speaker (EMINENCE) x 1
Controller/Switch
Front Panel: GAIN, MASTER, TREBLE, HIGH MID, LOW MID,
BASS, PRESENCE, REVERB, AMP select switch,
for each channel (A/B), Channel select switch (A/B)
Rear Panel: EFFECT BLEND, SP MUTE switch, for each
channel (A/B), EFFECT SEND/RETURN level switch
Indicator
Peak Level Display LED (Red)
Connection Jacks
INPUT HIGH/LOW, EFFECT SEND/RETURN, LINE
OUT/PHONES, FOOT SW (CH SELECT, REVERB):
All Standard Phone Mono Jack
A/D Converter 20 bit + 3 bit floating
D/A Converter 20 bit
Sampling Frequency 48 kHz
Input Level/Impedance
INPUT HIGH: –20 dBm (THRU)/1 MΩ
INPUT LOW: –10 dBm (THRU)/1 MΩ
EFFECT RETURN: 0 dBm/120 kΩ
Output Level/Impedance
60 W RMS/8 Ω
SPEAKER:
+2 dBm/47 Ω
LINE OUT:
EFFECT SEND: –2 dBm/1 kΩ
Power Requirements
U.S. and Canadian models : 120 V, 60 Hz
General model :
Power Consumption
70 W
Dimensions (W x H x D)
540 x 504 x 276 mm (21.3" x 19.8" x 10.9")
Weight
18.0 kg (39 lbs 11 oz)
DG60-112
230 V, 50 Hz
3