Helmet Holder - Yamaha Tmax XP500Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
2
2
3
1. Rider backrest
2. Bolt
4
3. Slide the backrest forward or back-
ward to the desired position.
5
4. Install and securely tighten the
backrest bolts.
6
5. Close the seat.
7
8
9

Helmet holder

1
1
1. Helmet holder
The helmet holder is located under the
seat. A helmet holding cable is provid-
ed beside the owner's tool kit to secure
a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 4-14.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
3. Securely
WARNING! Never ride with a
helmet attached to the helmet
EAU14341
To release the helmet from the hel-
met holder
Open the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then close the
seat.
close the seat.
4-15
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
[EWA10161]