Other Features - Sanyo CE42FD81-B Instruction Manual

H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
• Select H Position item by using
 
• Use / button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top or
bottom of the screen.
• Select V Position item by using
 
• Use / button to adjust the value.
Dot Clock
Dot Clock adjustments correct interference that ap-
pear as vertical banding in dot intensive presenta-
tions like spreadsheets or paragraphs or text in smaller
fonts.
 
• Use / button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV Set, you may see a hazy or noisy
picture on the screen. In such a case you can use
this item to get a clear picture by trial and error method.
 
• Use / button to adjust the value.
Sound in PC mode
• Connect the PC's Audio output to the TV's PC Audio
In socket with an audio cable.


/ button.

/

button.
English - 20 -

Other Features

TV Status
Programme Number,
Sound Indicator and Zoom Mode are displayed
on the screen when a new programme is entered or
.
" " button is pressed
Mute Indicator
It is placed in the upper side of the screen when
enabled.
To cancel mute, there are two alternatives; the first
one is pressing the
increasing the volume level.
PIP and PAP modes
Press the " " button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is displayed
on the main picture. There are 1 size and 4 positions
(upper left, upper right, bottom left and bottom right)
available for the PIP window. You can use
to change the PIP position. Aspect Ratio of the PIP
window is fixed and 4:3.
When PIP Mode is entered, the default active window
is PIP window and the active window is indicated by
a white frame around it. The active window can be
changed by pressing
OSD belongs to active window. The place of the sta-
tus OSDs are same for both windows.
Press the " " button again to exit the PIP mode.
Press the " " button to switch to PAP mode.
At PAP Mode, two pictures with equal sizes are dis-
played on the screen. Aspect Ratios of the windows
are fixed.
When you switch to PAP Mode, Main window in PIP
Mode is displayed on the right side of the screen. The
active window can be changed by pressing
button.
Press the " " button again to exit the PAP mode.
NOTE: In all HDMI modes, Pip and PAP are not vis-
ible. In YPbPr 1080i , Pip is not visible.
PAT
In PAT (Picture and Text) mode, picture is splitted into
two and text is displayed near the main picture.
Programme Name,
button and the second one is
 
/ button. The status info
button
 
/