Install Menu - Sanyo CE42FD81-B Instruction Manual

EXT2 Out

select EXT2 Output. Use

By pressing /
button, to set Ext-2 Out to TV, EXT1, EXT3, EXT4,
EXT5, EXT7 or PC.
Note: Only audio output is available for EXT-3,
EXT-6, EXT-7 and PC .The other options have
both audio and video outputs.
If currently watched source is analogue TV, a con-
nected device displays analogue TV source as well.
If this source is set to digital mode, connected de-
vice displays digital source. In order to avail this
function, EXT-2 Output should be set to TV/DTV.
Default Zoom


By pressing /
You can set Default Zoom to Full, Panoramic, 4:3
or 14:9 Zoom by pressing
Blue Background

button, select Blue Background.

By pressing /
 
Press / button to set Blue Background as on or
off.
Menu Background


By pressing /
ground. You can change menu background to Trans-
lucent or Opaque by pressing
Menu Timeout


By pressing /
 
Press / button to change menu timeout to 15 sec,
30 sec or 60 sec.
Teletext Language


By pressing / button, select Teletext Language.
 
Press / button to change Teletext Language to
West, East, Turk/Gre,Cyrillic, or Arabic.

Install Menu

Program
Band
Channel
Colour System
Sound System
Fine Tune
Search
VCR
Store Program
button, select Default Zoom.
 
/ button.
button, select Menu Back-
 
/ button.
button, select Menu Timeout.
INSTALL
AUTO
423.25
Program
 
/ By pressing

/ button to select the program number. You can also
enter a number via digit buttons on the remote control.
There are 100 program storage between 0 and 99.
Band
Band can be selected either "C" or "S" by press
button.
Channel
Channel can be changed by
tons.
Colour System
By pressing

Press /
PAL, SECAM or AUTO.
If Sound System is set to I, SECAM is not available for
the Colour System.
NOTE: In EXT mode, you can choose NTSC 3.58,
NTSC 4.43 or PAL60 as well.
Sound System
By pressing
 
Press /
I, DK, L or LP.
Fine Tune
By pressing

/ button to adjust the tuning.
Search
By pressing

button to start program searching.You can also
enter the desired frequency via digit buttons when
search item is highlighted.
VCR
This item can be seen in all modes except YPbPr,
HDMI and PC.
If you want to watch a VCR source from one of these
1
modes, then it will be better to set VCR mode "on".
S
For this, while the cursor is on this item press the
36

buttons to set it "On".
BG
If you want to watch a DVD , then you must set this
0
item "Off".
Store Program
Off
By pressing
Press " "or "OK" button to store the adjustments.
"Program Stored" will be displayed on the screen.
English - 17 -


/ button, select Program. Press
 
/


/ button, select Colour System.

button to change the colour system to


/ button, select Sound System.
button to change the sound system to BG, ,


/ button, select Fine Tune. Press


/ button, select Search. Press


/ button, select Store Program.

 
/
button or Digit But-


/

/