Sanyo CE42FD81-B Instruction Manual page 12

Installation
The Installation menu mainly intends to help you for
building a Channel Table in the most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
This menu includes the following items:
1. Add New Channels
2. First Time Installation.
ADD NEW CHANNELS:
This tuning menu consists of two parts:
 Automatic Search
 Manual Search
Installation
Add New Channels
First Time Installation
Automatic Search:
Automatic search is started by pressing the "OK "
button in the auto-search pop up menu. All the ser-
vices are searched and a channel table is created
automatically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search:
In manual search, the number of the multiplex is en-
tered manually and only that multiplex is searched for
the channels. For every valid channel number, signal
level, signal quality and network name are shown at
the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
FIRST TIME INSTALLATION
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight "First Time In-
stallation" menu and press the "OK" button, then
Automatic Search
Manual Search
English - 11 -
you will be asked to confirm for deleting all channels
and settings.
Installation
Add New Channels
First Time Installation
Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?
Y es
By selecting YES and pressing the "OK" button, the
existing channel table will be deleted.
After factory settings is loaded, "First Time Instal-
lation" menu will be displayed.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
Press the "OK(SELECT)" button to start installation.
After search is completed for digital channels, a mes-
sage asking search for analogue channels appears
on the screen.
Do you want to search for
analogue channels?
Yes
Press the "OK(SELECT)" button to search for ana-
logue channels.The following menu appears on the
screen for analogue channel search.
AUTO PROGRAM
Country
Text language
Select your Language, Country and Text language



by using / and
to continue. To cancel, press "BLUE" button.
No
No
No
Germany
West

/ buttons. Press "OK" button