Table of Contents
Advertisement
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial broad-
casting.
Obtain the Conditional Access Module (CAM) and the
Viewing card by subscribing to a pay channel com-
pany, then insert those to the Television using the
following procedure.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, then Viewing Card to the slot that is
located in the terminal cover at the left-hand side
of the TV (from front view).
• The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Common
Interface then pressing the "OK(SELECT)" button.
(CAM set up menu is not displayed when it is not
required.)
• To see the viewing contract information:
Enter IDTV; press the "M" button, then highlight Com-
mon Interface and press the "OK(SELECT)" button.
• When no module is inserted, "No Common Inter-
face module detected" message appears on the
screen.
• Refer to the module instruction manual for details of
the settings.
Menu System
Picture Menu
Mode
Contrast
Brightness
Sharpness
Colour
Colour Temp
Noise Reduction
Film Mode
Store
Reset
PICTURE
Dynamic
Normal
Low
NO SIGNAL
Mode
By pressing
button to choose from one of these options: Cinema,
Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/Hue
By pressing
Press
/
Hint: Hue is displayed in picture menu when the TV
receives an NTSC signal.
Colour Temp
• By pressing
• Press
Cool, Normal and Warm.
Noise Reduction
By pressing
Press
/
Low, Medium, High or Off.
Film Mode
Films are recorded at a different number offrames
per second to normal television programmes.
By pressing
Press
/
this feature on when you are watchingfilms to see
the fast motion scenes clearly.
Store
• By pressing
• Press
"Stored" will be displayed on the screen.
Reset
By pressing
or "OK" button to reset the picture modes to factory
default settings.
Sound Menu
63
63
31
99
Off
English - 15 -
button, select Mode. Press
/
/
button, select the desired Option.
button to set the level.
button select Colour Temp.
/
/
to choose from one of these options:
button select Noise Reduction.
/
to choose from one of these options:
/
button, select Film Mode.
button to set this feature On or Off. Turn
button select Store.
/
or "OK" button to store the adjustments.
button, select Reset. Press
/
SOUND
Volume
Equalizer
Balance
Headphone
Sound Mode
AVL
Effect
Dynamic Bass
3D Panaroma
Subwoofer
Store
/
/
15
0
Mono
On
Off
Off
Off
Off
Hide quick links:
Advertisement
Table of Contents
