Adjusting The Volume; Adjusting Picture Quality; Fine-Tuning The Picture Or Sound - Insignia NS-F20C User Manual

Adjusting the volume

To adjust the volume with the remote
control:
1 Press VOL+ or VOL– to increase or
decrease the volume.
2 Press MUTE to turn off the sound. Press this
button again to restore sound.
To adjust the volume from the OSD:
1 Press MENU to open the on-screen display
(OSD).
2 Press VOL+ or VOL– to select the audio
icon . The Audio menu opens.
Audio
Volume
3 Press CH+ or CH– to select VOLUME.
4 Press VOL+ or VOL- button adjust the
volume.

Adjusting picture quality

To adjust picture quality:
1 Press MENU to open the on-screen display
(OSD). The Video menu opens.
2 Press CH+ or CH– to select an option. You
can select:
• Contrast–Adjusts the white and dark
areas in the video image. Increasing the
value adjusts the white areas. Decreasing
the value adjusts the dark areas.
• Brightness–Adjusts the amount of light
and dark in the video image. Increasing
the value adds more light to the dark
areas. Decreasing the value adds more
dark to the light areas.
• Color–Adjusts the color in the video
image.
8
45
www.insignia-products.com
Insignia NS-F20C 20" Flat Tube TV
• Sharpness–Adjust the clarity of the video
image. Increasing the value shows a
cleaner, clearer image. Decreasing the
value shows a smoother image.
• Tint–Adjusts the color tint. Increasing the
value adds more red to skin color.
Decreasing the value adds more green to
skin color.
• Color Temp.–Adjusts the overall color of
the image. You can select Neutral,
Warm, or Cool.
3 Press VOL+ or VOL- button adjust an option.

Fine-tuning the picture or sound

If the picture or sound quality is poor, try
adjusting the picture quality and sound quality
first. For more information, see "Adjusting
picture quality" on page 8.
If picture or sound quality is still poor after you
have adjusted the picture and sound, you can
use the Fine option to improve the quality.
Caution
Do not use this option unless the picture or sound
quality are poor.
To fine-tune the picture or sound:
1 Press MENU to open the on-screen display
(OSD).
2 Press VOL+ or VOL– to select the channel
icon . The Channel menu opens.
3 Press CH+ or CH– to select Fine.
4 Press VOL+ or VOL– to start the fine-tuning
process.