Auto Presetting; Tuning In To Preset Stations; Rds Tuning - Sherwood R-807 Operating Instructions Manual

R-807 NETWORk AV RECEIVER

Auto Presetting

1
Press and hold down ENTER/MEMO for more
than 2 seconds.
• "AUTO MEMORY" blinks and the main unit
begins to preset stations with strong signals.
• Up to 30 FM stations may be stored.
• To stop auto presetting, press ENTER/MEMO
again.
Note
• FM stations with weak signal strength cannot be
stored to memory.

Tuning in to Preset Stations

1
Select Fm TUNER as the input source.
2
Select a desired preset number by pressing
PRESET - or PRESET +.
40

RDS Tuning

RDS (Radio Data System) is a way of sending
information signals along with transmitter signals.
Your tuner is capable of translating these signals and
displaying the information.
These codes contain the following information:
Program Service name (PS), A list of Program Types
(PTY), Traffic Announcement (TA), Radio Text (RT).
Note
• In some countries, RDS tuner function may not
be available.
PTY search
Use this function to automatically search and receive
stations broadcasting a desired type of program.
1
In the FM mode, select the PTY search mode in
the following order:
• "PTY SEARCH (PTY NAME)" is displayed.
2
Press  or  and ENTER/MEMO to select a
program type.
• Each time these buttons are pressed, one of
29 different types of programs is selected.
(NEWS, AFFAIRS, INFO, SPORT, EDUCATE,
DRAMA, CULTURE, SCIENCE, VARIED,
POP M, ROCK M, EASY M, LIGHT M,
CLASSICS, OTHER M, WEATHER,
FINANCE, CHILDREN, SOCIAL, RELIGION,
PHONE IN, TRAVEL, LEISURE, JAZZ,
COUNTRY, NATION M, OLDIES, FOLK M,
DOCUMENT)
• When "PTY SEARCH (PTY NAME)" is not
displayed, repeat from step 1.