Drc; Tone; Tone; Sound Delay - Sherwood R-807 Operating Instructions Manual

R-807 NETWORk AV RECEIVER

DRC

This function compresses the dynamic range of
previously specified parts of the Dolby Digital, Dolby
TrueHD or DTS sound track (with extremely high
volume) to minimize the difference in volume between
the specified and non-specified parts. This makes
it easier to hear the full sound track when watching
movies at night at low levels.
menu item
Adjusts the dynamic range
Auto compression automatically (Dolby
TrueHD only).
Off Turns off the DRC function.
mid Sets to Mid compression.
max Sets to Max compression.

Tone

You can adjust the tone (bass and treble) as desired.
menu item
On Adjusts the tone for your taste.
Listens to a program source
Off
without the tone effect.
Adjusting the tone (Bass and Treble)
You can adjust the tone if the Tone is set to "ON".
1
Select the desired tone by pressing  or , and
then press .
48
2
Description
Description

Sound Delay

Some monitors have a slight delay during video
playback, so the soundtrack will be slightly out of sync
with the picture. By slightly increasing delay, you can
sync the sound to the video. The delay can be adjusted
within the range of 0 ms ~ 90 ms.

low Frequency Effect

This channel reproduces low-frequency bass signals
and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with
Dolby Digital or DTS to enhance low frequency audio
effects. When the receiver is connected to a subwoofer,
you can produce LFE (low-frequency effect) channel
sounds and reinforce the bass parts of other channels.
The Low Frequency Effect can be disabled and set in
4 steps from -20 dB to 0 dB.
Adjust the selected tone as desired by
pressing  or .
• The tone level can be adjusted within the
range of -10 ~ +10 dB.
• It is recommended the bass and treble to be
adjusted to 0 dB (flat level).
Caution
• Extreme settings at high volume may damage
your speakers.