Auto Presetting; Tuning In To Preset Stations; Recording - Sherwood R-807 Operating Instructions Manual

Auto Presetting

1
Press and hold down ENTER/MEMO for more
than 2 seconds.
• "AUTO MEMORY" blinks and the main unit
begins to preset stations with a strong signals.
• Up to 30 FM stations may be stored.
• To stop auto presetting, press ENTER/MEMO
again.
Note
• FM stations with weak signal strength cannot be
stored to memory.

Tuning in to Preset Stations

1
Select Fm TUNER as the input source.
2
Select a desired preset number by pressing
PRESET - or PRESET +.
Operating Your System

Recording

You can make an audio or a video recording from
the built-in tuner, or from an audio or video source
connected to the receiver (such as a CD player or
TV). Keep in mind you can't make a digital recording
from an analog source or vice-versa, so make sure
the components you are recording to/from are hooked
up in the same way. (For details on connection, see
"Connecting Playback Components" on page 18.)
• The receiver's volume, Audio parameters (the tone
controls, for example), and surround effects have no
effect on the recorded signal.
• Some digital sources are copy-protected, and can
only be recorded in analog.
• Some video sources are copy-protected. These
cannot be recorded.
1
Select the desired recording source.
INPUT SElECTOR
2
Start recording on the component.
3
Start play on the desired input.
• The audio and video signals from the desired
input will be dubbed on the recorder and you
can enjoy them on the TV set and from the
speakers.
Note
• The volume and tone (bass and treble) settings
have no effect on the recording signals.
• When recording the analog signals from CD,
AUX, F.AUX etc., be sure to select the analog
input.
41