Brother MFC-9320CW Quick Setup Manual page 32

Wireless Network
m
Enter the Network Key you wrote down in
step 16-a on page 28 and then enter the key
again in Confirm Network Key, then click
Next.
n
Click Next. The settings will be sent to your
machine.
Note
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry.
o
Disconnect the USB cable between the
computer and the machine.
32
p
Click Next to continue to install MFL-Pro Suite.
Wireless setup is now complete. A four
level indicator at the right of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite, continue to
step 19-j on page 39.
Now go to
page 39
®
Windows