Wlan Connection Is Very Weak; Cannot Connect To The Wireless Router - HP EliteBook User Manual

5. Click the Association tab, and then enter the correct wireless encryption data into the Network
key field.
6. Click OK to save these settings.

WLAN connection is very weak

If the connection is very weak, or if your computer cannot make a connection to a WLAN, minimize
interference from other devices, as follows:
●
Move your computer closer to the wireless router or access point.
●
Temporarily disconnect other wireless devices such as a microwave, cordless phone, or cellular
phone to be sure that they are not interfering.
If the connection does not improve, try forcing the device to reestablish all connection values:
1. Select Start > Control Panel > Network and Internet Connections > Network Connections.
2. Right-click the network, and then click Properties.
3. Click the Wireless Networks tab.
A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs are
active, several will be displayed.
4. Select a network, and then click Remove.

Cannot connect to the wireless router

If you are trying to connect to the wireless router and are unsuccessful, reset the wireless router by
removing power from the router for 10 to 15 seconds.
If the computer still cannot make a connection to a WLAN, restart the wireless router. For details, refer
to the router manufacturer's instructions.
26 Chapter 2 Wireless, modem, and local area network