Cpu - Toshiba Satellite U300 Series Maintenance Manual

Replacement Procedures

4.15 CPU

Removing the CPU heat sink
The following describes the procedure for removing the CPU heat sink (See Figure 4-27).
1. Disconnect the Heat sink cable from the connector on the system board
2. Remove the following screws securing the heat sink holder along 1 to 6.
• M2.0×3.0
BIND screw x6
NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse
order of the number marked on the holder.
3. Remove the CPU heat sink.
Figure 4-27 Removing the CPU heat sink
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08) 47