Cover Assembly - Toshiba Satellite U300 Series Maintenance Manual

Replacement Procedures

4.10 Cover assembly

Removing the cover assembly
The following describes the procedure for removing the cover assembly (See Figure 4-19 to
4-21).
1. Turn over the computer.
2. Remove the following screws securing the cover assembly from the back and bottom
of computer.
• M2.0×5.0
• M2.5×10
• M2.0×4.0
• M2.5×7.0B
• M2.0x3.0
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
x5
x2
x1
x6
x4
4-34