Levelling The Machine - Miele T 8433 C Operating Instructions Manual

Replacing the lid
If the lid has been removed in order to
fit a coverplate, ensure that, if the lid is
ever replaced, it fits securely into the
rear holders. Otherwise, it is not
properly secure for transport.

Levelling the machine

The machine must be perfectly level to
ensure safe and proper operation.
^ The screw feet can be adjusted to
compensate for any unevenness in
the floor.
,
The air inlet and outlet vents on
the front of the machine must not be
covered as this would prevent
sufficient ventilation for cooling the
condenser unit.
Installation
39