Table of Contents
Advertisement
ASSEMBLY
Assembly is easy and requires no tools.
●
1
Position the lower stem (the straight tube)
with the silver button toward the back.
Using the bolt and knurled knob, attach
the search coil to the plastic extension
protruding from the lower stem.
●
2
Press the button on the
upper end of the
lower stem, and
slide
the
stem into the upper
stem.
Adjust the stem to a length that
lets you maintain a comfortable
upright posture, with your arm
relaxed at your side, and the
search coil parallel to the
ground in front of you.
●
3
Wind the cable securely
around the stem.
●
4
Insert the plug into the
matching connector on the
right underside of the
detector body. Be sure that
the key-way and pins line
up correctly.
Caution:
Do not force the
plug in. Excess force
will cause damage.
To disconnect the
cable, pull on the
plug. Do not pull
on the cable.
lower
3
Advertisement
Table of Contents
