In The Field Techniques - Titan 1000XD Owner's Manual

IN THE FIELD TECHNIQUES

PINPOINTING
Accurate pinpointing takes practice
and is best accomplished by "X-ing"
the target area.
1. Once a buried target is indicated
by a good
continue sweeping the coil over
the target in a narrowing
to-side pattern.
2. Take visual note of the place on
the ground where the "beep"
sounds.
3. Stop the coil directly over this spot
on the ground.
4. Now move the coil straight
ward and straight back towards
you a couple of times.
5. Again make visual note of the spot
on the ground at which the
"beep" sounds.
6. If needed, "X" the target at
different angles to "zero in" on
the exact spot on the ground at
which the "beep" sounds.
When pinpointing a target, try drawing an "X",
as illustrated, over where the tone is induced.
NOTE: This modern Metal Detector is referred to as a Motion Detector since it can respond to a
target only while the searchcoil is being moved over the Target
14
tone response,
side-
for-
COIL MOVEMENT
When swinging the coil, be careful
to keep it level with the ground
about one inch from the surface.
Never swing the coil like a pendu-
lum.
WRONG
CORRECT